Precautions, Ge neral info rmation – Sharp XL-S10 User Manual
Page 6
03/12/18
XL-S10(U)1.fm
6
XL-S10
TINSEA018SJZZ
Ge
neral Info
rmation
Precautions
! General
"
Please ensure that the equipment is positioned in a well-venti-
lated area and that there is at least 4" (10 cm) of free space along
the sides and back. There must also be a minimum of 8" (20 cm)
of free space on the top of the unit.
"
Do not place anything on top of the unit.
"
Do not expose the unit to moisture, to temperatures higher than
140°F (60°C) or to extremely low temperatures.
"
If the system does not work properly, unplug and plug it in again.
Then turn on the system.
"
This unit should only be used within the range of 41°F - 95°F
(5°C - 35°C).
Warnings:
"
The voltage used must be the same as that specified on this unit.
Using this product with a higher voltage other than that which is
specified is dangerous and may result in a fire or other type of
accident causing damage. SHARP will not be held responsible
for any damage resulting from use of this unit with a voltage other
than that which is specified.
"
CD players use a laser pickup which can damage the eyes if
viewed directly. Do not look at the pickup, and do not touch
the pickup directly.
! Volume control
The sound level at a given volume setting depends on speaker effi-
ciency, location and various other factors. It is advisable to avoid
exposure to high volume levels, which occurs while turning the unit
on with the volume control setting up high, or while continually lis-
tening at high volumes.
"
Use the unit on a firm, level surface free from
vibration.
"
Keep the unit away from direct sunlight,
strong magnetic fields, excessive dust, hu-
midity and electronic/electrical equipment
(home computers, facsimiles, etc.) which
generate electrical noise.
"
In case of an electrical storm, unplug the unit
for safety.
4" (10 cm)
4" (10 cm) 4" (10 cm)
8" (20 cm)
"
Hold the AC power plug by the head when re-
moving it from the AC outlet, as pulling the
cord can damage internal wires.
"
Do not remove the outer cover, as this
may result in electric shock. Refer internal
service to your local SHARP service facil-
ity.