Sharp XL-S10 - Manual (Page 30)

03/12/18 XL-S10(U)3.fm
30
XL-S10
TINSEA018SJZZ
Referenc
es
Specifications
As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification fig-
ures indicated are nominal values of production units. There may be
some deviations from these values in individual units.
" General
" Amplifier
" Tuner
" CD player
" Cassette deck
" Speaker
Power source AC 120 V, 60 Hz
Power
consumption 28 W
Dimensions Width: 6-5/16" (160 mm)
Height: 9-1/2" (242 mm)
Depth: 9-7/8" (250 mm)
Weight 5.1 lbs. (2.3 kg)
Output power 5 watts minimum RMS per channel into 4
ohms from 100 Hz to 15 kHz, 10% total har-
monic distortion
Output terminals Speakers: 4 ohms
Headphones: 16 - 50 ohms
(recommended: 32 ohms)
Subwoofer pre-out (audio signal):
500 mV/47 k ohms
Input terminals Video/Auxiliary (audio signal):
500 mV/47 k ohms
Frequency range FM: 87.5 - 108.0 MHz
AM: 530 - 1,720 kHz
Type Compact disc player
Signal readout Non-contact, 3-beam semiconductor laser
pickup
D/A converter 1-bit D/A converter
Frequency
response 20 - 20,000 Hz
Dynamic range 90 dB (1 kHz)
Frequency
response 125 - 8,000 Hz (normal tape)
Signal/noise ratio 50 dB (recording/playback)
Wow and flutter 0.3 % (WRMS)
Type 4" (10 cm) full-range speaker (magnetically
shielded)
Maximum input
power 10 W
Rated input power 5 W
Impedance 4 ohms
Dimensions Width: 5-1/8" (130 mm)
Height: 9-7/16" (240 mm)
Depth: 6-5/16" (161 mm)
Weight 3.3 lbs. (1.5 kg)/each