Sharp XL-S10 - Manual (Page 23)

03/12/18 XL-S10(U)3.fm
23
XL-S10
TINSEA018SJZZ
Adv
a
nced F
eatures
Timer and sleep operation
This may be operated only with the remote control.
Timer playback:
The unit turns on and plays the desired source (CD, tuner) at the
preset time.
Sleep operation:
The radio and compact disc can all be turned off automatically.
Note:
The timer and sleep operations are not available during the tape
mode.
" Timer playback
Continued to the next page
Before setting timer:
1
Press the CLOCK button to check that
the clock is set to the correct time.
2 Load a disc to be played.
1 Press the ON/STAND-BY button to turn the power on.
2 Press the CD or TUNER (BAND) button to select the de-
sired function.
If you select TUNER (BAND), tune in to the desired station.
3 Adjust the volume using the VOLUME buttons.
Do not turn the volume up too high.
4 Press the TIMER button and within 6 seconds, press the
MEMORY button.
5 Within 1 minute, press the PRESET ( or ) button to
specify the hour to start, then press the MEMORY button.
6 Within 1 minute, press the PRESET ( or ) button to
specify the minutes to start, then press the MEMORY but-
ton.
! The timer playback starting time, function, and volume will be
displayed, and then the unit will enter the stand-by mode au-
tomatically.
! " " will light up and the current time will be displayed.
To cancel the timer playback:
Press the ON/STAND-BY button to turn the power on.
7