Sharp XL-S10 User Manual
Page 10
03/12/18
XL-S10(U)1.fm
10
XL-S10
TINSEA018SJZZ
Pre
p
aration
for Use
System connections (continued)
! Placing the speaker system
There is no distinction between the right and the left speakers.
Note:
The speaker grilles are not removable.
! Connecting the AC power cord
After checking all the connections have been made correctly, plug
the AC power cord of this unit into the wall socket.
Note:
Unplug the unit if it will not be used for a prolonged period of time.
! To turn the power on
Press the POWER ON/STAND-BY button to turn the power on.
To set the unit to the stand-by mode:
Press the POWER ON/STAND-BY button again.
Notes:
"
The speakers are magnetically shielded.
Therefore, they do not affect the display even if you use them near
the TV. However, some color variation may occur, depending on
the type of TV used.
If color variation occurs...
Turn off the TV (from the power switch).
After 15 - 30 minutes, turn the TV on again.
If the color variation is still present...
Move the speakers further away from the TV.
"
If any kind of magnet or an electromagnet is placed too close to
the TV and the system, irregular colors may appear on the TV
screen.
Left speaker
Right speaker