Sharp XL-S10 - Manual (Page 25)

03/12/18 XL-S10(U)3.fm
25
XL-S10
TINSEA018SJZZ
Adv
a
nced F
eatures
Enhancing your system
The connection cord is not included. Purchase a commercially avail-
able cord as shown below. " Listening to the playback sounds from VCR,
DVD, etc.
Note:
To prevent noise interference, place this unit away from a television.
" To record on a tape
VCR, DVD, etc.
To the line
output jacks
RCA cord
(not supplied)
Red
White
Red White
1 Use a connection cord to connect the VCR, DVD, etc. to the
VIDEO/AUX IN jacks.
When using video equipment, connect the audio output to this
unit and the video output to a television.
2 Press the ON/STAND-BY button to turn the power on.
3 Press the FUNCTION button until "AUX" appears on the
display.
When operating with the remote control, press the VIDEO/AUX
button.
4 Play the connected equipment.
1 Insert a cassette in the cassette compartment.
2 Press the FUNCTION button until "AUX" appears on the
display.
When operating with the remote control, press the VIDEO/AUX
button.
3 Press the button.
4 Press the button, which also engages the button.
5 Press the button again to cancel the pause mode.
6 Play the VCR, DVD, etc.
7