Star Micronics SCP700 - Manual (Page 162)

158
APPENDIX
*1
Combo mode
The SCP700 printer is perfect for typical POS systems. The Combo printer
offers high speed receipt printing, multi part document printing, integrated
customer display, and support for up to two cash drawers from a single
interface connection.
*2
Independent mode
The dual interface can be used to make the SCP700 to look like two
independent printers. This enables the SCP700 to replace two printers in
many existing systems without any software modifications.
*3
Standard
↔
Receipt indicates that the standard interface is connected to the
receipt printer. Therefore, when data is sent to the receipt printer from the
port of your host computer connected to the standard interface and when it
is sent to the slip printer from the port of your host computer connected to
the optional interface, DIP switch 2-4 should be set to OFF and switches 2-
5 and 2-6 should be set to ON.
Command Emulation
Printer mode Interface
Switch
2-4
Switch
2-5
Switch
2-6 Receipt
printer
Slip printer
Star mode Star mode
*1
Combo mode
Standard ON ON ON
Option ON OFF ON
Star mode TM-295
*2
Independent
mode
*3
Standard
↔
Receipt
Option
↔
Slip
OFF ON ON
Standard
↔
Slip
Option
↔
Receipt
OFF OFF ON
TM-T85 TM-295
Standard
↔
Receipt
Option
↔
Slip
OFF ON OFF
Standard
↔
Slip
Option
↔
Receipt
OFF OFF OFF