Star Micronics SCP700 - Manual (Page 14)

10
ENGLISH
Important!
Note that the receipt printer mechanism consists of an auto-cutter unit (on top)
and a roller unit (on the bottom), and that the auto-cutter unit can be raised by
itself. Be sure to raise both the auto-cutter unit and the roller unit when loading
paper.
❏
Pushing the spindle arm on the left toward the side of the printer, lower the
paper roll into position so the two spindles are aligned with the holes on
either end of the paper roll’s cardboard core. Release the left spindle arm so
the spindle enters the hole in the paper roll’s core and secures the roll in
place.