Siemens M101 - Manual (Page 37)

Tips & tricks, settings
37
appendix.fm5 16.4.99 Gigaset V.24 Adapter dt/eng:A30853-X400-B104-3-74D1
Miscellaneous
Faxes are distorted when sent
with ELSA Microlink 56k and
WinFax 8.0 software.
Incorrect driver for voice func-
tions set under WinFax 8.0.
During installation, WinFax 8.0
requires a modem driver to be
selected for voice functions; the
Generic / Rockwell Fax/Voice
driver is to be used here accord-
ing to ELSA AG.
Fault Cause Solution
Monitor fault when Gigaset
M101 Data is active (e.g. slight
flickering or moiré effect).
DECT HF wanted signal is influ-
encing the monitor.
Move Gigaset M101 Data along
the longitudinal axis until the in-
terference disappears. Move Gi-
gaset M101 Data further away
from the monitor.
A slight humming can be heard
in the loudspeakers connected
to the sound card when Gigaset
M101 Data is active.
DECT HF wanted signal is de-
modulated by the analog com-
ponents of the sound card or
the amplifiers of active speakers
and thus produces a humming
sound.
Move Gigaset M101 Data along
the longitudinal axis until the in-
terference disappears. Move Gi-
gaset M101 Data further away
from the sound card/loudspeak-
ers.
Fault Cause Solution
Issued by
Information and Communication Products
Hofmannstraße 51, D-81359 München
© Siemens AG 1999. All rights reserved.
Subject to availability.
Right of modification reserved.
Siemens Aktiengesellschaft
http://www.siemens.de/gigaset
Ref. no.: A30853-X400-B104-3-74D1
Printed in Germany
04/99