Siemens M101 - Manual (Page 25)

Tips & tricks, settings
25
appendix.fm5 16.4.99 Gigaset V.24 Adapter dt/eng:A30853-X400-B104-3-74D1
To switch from Gigaset 2 to 3, simply click Change station type
on the Local Station tab.
PC - PC direct cable connection: via RS232/V.24 interface
The problem that often occurs withPC - PC direct cable connec-
tions is incorrect baud rate setting. The following section de-
scribes how to configure a PC - PC direct cable connection at a
Win95 1 system.
Before using the actual Gigaset M101 Data, application function-
ality should be checked using a null-modem cable 2 . This accel-
erates fault detection and clearance. If this is not possible, the
precise configuration should be observed.
● Gigaset M101 Data can be set to a fixed baud rate (direct
connection 115,200 bps with HW handshake).
2 3
1
COM
Teilnehmer Basis
Teilnehmer Basis
V.24
V.24-DECT
PC
64 kbit/s
Gigaset
M101
Gigaset 2
Gigaset
Analog
Modem
analog oder ISDN
V.24
Telefon
Anschluß
Gigaset 3
V.24
V.24-DECT
PC
64 kbit/s
Gigaset
M101
Gigaset 1
PC with
configuration program
Extension Base
Extension Base
Switch
the connection
by changing the
station type
1 similarly for WIN98
2 after the test, remove the null-modem cable and use the cable
supplied