Smeg C6GGXU - Manual (Page 8)

Instructions for the user
10
OVEN BURNER CONTROL KNOB
This knob is used to light the oven burner inside the oven cavity
and to regulate the desired temperature for cooking.
Push in and turn the knob counterclockwise to the desired
temperature; when the burner ignites, keep the knob pushed in for a
few seconds to allow the thermocouple to heat up.
When lighting the oven, it is recommended to leave the oven door
partially open.
If after 10 seconds the oven indicator light does not illuminate, turn
off the oven and fully open the oven door to permit any
uncombusted gas to escape.
The ON/OFF light adjacent to the oven knob indicates whether the oven burner has ignited.
BROIL BURNER CONTROL KNOB
This knob turns on the broil burner inside the oven cavity and allows
you to select the desired setting for broiling.
Push in and turn the knob counterclockwise to the desired
temperature; when the broil burner ignites, keep the knob pushed in
for a few seconds to allow the thermocouple to heat up.
It is recommended to keep the oven door partially open when
lighting the broil burner.
If after 10 seconds the oven indicator light does not illuminate, turn
off the oven and fully open the oven door to permit any
uncombusted gas to escape.
The ON/OFF lamp located adjacent to the control indicates whether or not the broil burner has
ignited.
RANGETOP BURNER COMMAND KNOB
To light surface burners, press in and turn the appropriate knob
counterclockwise to the large flame symbol. To adjust the flame, turn
the knob to any position between the maximum and minimum
marks. To turn off, turn the knob to .