Sony CD300 - Manual (Page 93)

masterpage:Right
filename[D:\WORKS\CD\3067951111\3067951111MVCCD200UC\02GB-
MVCCD200UC\09add.fm]
93
model name1[MVC-CD200/CD300]
[3-067-951-11(1)]
Ad
diti
onal
inf
orma
tion
Troubleshooting
If you experience trouble with your camera, first check the following items. Should
your camera still not operate properly after you have made these checks, press the
reset button located on the bottom. (If you press the reset button, the date and time
setting is cleared.) Should your camera still not operate properly, consult your Sony
dealer or local authorized Sony service facility. If code displays (C:
ss ss ss ss : ss ss ss ss )
appear on the LCD screen, the self-diagnosis display function is working
(page 102).
Symptom Cause and/or Solution
Your camera does not
work. • You are not using an “InfoLITHIUM” battery pack.
t Use an “InfoLITHIUM” battery pack (page 9).
• The disc is not inserted properly.
t Eject the disc, and insert it again (page 16).
• The battery level is too low. (The E indicator
appears.)
t Charge the battery pack fully (page 10).
• The AC power adaptor is not connected securely.
t Connect it securely to the DC IN jack and a wall
outlet (mains) (page 10, 13).
• The malfunction occurs inside the camera.
t Turn off the power, and turn on after one
minute, then check that the camera works
properly.
Your camera cannot
record images. • The mode dial is set to or SET UP.
t Set it to , S, A, M, SCN, or (pages 20,
26).
• No disc is inserted into your camera.
t Insert a disc (page 16).
• The disc has not been initialized.
t Initialize the disc (page 18).
01cov.book Page 93 Thursday, March 8, 2001 4:59 PM