Sony CD300 User Manual
Page 34
masterpage:Left
filename[D:\WORKS\CD\3067951111\3067951111MVCCD200UC\02GB-
MVCCD200UC\04bas.fm]
34
model name1[MVC-CD200/CD300]
[3-067-951-11(1)]
Notes
•
It takes for about one minute to execute the finalization. Do not shake or jar the camera during
this operation. Place the camera on a stable surface during the finalization.
•
When you execute the finalization, we recommend that you use the external power source
(page 13).
When using CD-RWs, you can cancel the last-executed finalization. Once you cancel
it, the disc space for executing the finalization is recovered.
To cancel the unfinalization
Select [CANCEL] with
V
on the control button in step
2
, then press the center
z
.
When it is canceled, you can continuously record an image on the CD-RW.
To unfinalize after canceling the unfinalization
Set the mode dial to SET UP, then execute [UNFINALIZE] from [
] (DISC
TOOL) in the setup settings (page 84).
Notes
•
Unfinalization cannot be executed when you record a new image or edit an image on the CD-
RW after executing the finalization.
•
It takes about one minute to execute the unfinalization. Do not shake or jar the camera during
this operation. Place the camera on a stable surface during the unfinalization.
Canceling the finalization (UNFINALIZE) (only for CD-RWs)
1
Set the mode dial to the
, S, A, M, SCN, or
.
“UNFINALIZE PLACE ON LEVEL SURFACE”
appears on the LCD screen. Be sure to avoid any
vibration during the unfinalization.
2
Select [OK] with
v
on the control button, then press
z
z
z
z
.
Unfinalization starts and the disc remaining indicator changes from
to
.
Tip
You can also execute the unfinalization using [
] (DISC TOOL) in the setup settings
(page 84).
OK
UNFINALIZE
PLACE ON LEVEL SURFACE
O K
READY?
CANCEL
UNFINALIZE
AVOID ANY VIBRATION
READY TO UNFINALIZE
UNFINALIZE
AVOID ANY VIBRATION
UNFINALIZE IN PROGRESS
UNFINALIZE
UNFINALIZE COMPLETE
01cov.book Page 34 Thursday, March 8, 2001 4:59 PM