beautypg.com

Disabling of punch, Disabling of fold, Disabling of master machine mode – Sharp MX-M850 User Manual

Page 638: Disabling of slave machine mode, Copy function settings, Disabling deletion of job programs, Disabling of bypass-tray in duplex copy, Disabling of auto paper selection, Printer settings, Exclude bypass-tray from auto paper select

background image

68

Disabling of Punch
(When a punch module is installed.)
This setting is used to prohibit punching, such as when
the punch module of the finisher or the saddle stitch
finisher malfunctions.

Disabling of Fold
(When a folding unit is installed.)
Use this to prohibit paper folding, such as when the
folding unit fails.

Disabling of Master Machine Mode
This prohibits the use of the machine as a master
machine for tandem printing.
(Normally this setting is not necessary.)

Disabling of Slave Machine Mode
This prohibits the use of the machine as a slave machine
for tandem printing.
(Normally this setting is not necessary.)

Copy Function Settings

Disabling Deletion of Job Programs
This is used to prohibit the deletion and changing of copy
settings stored in job programs.

Disabling of Bypass-Tray in Duplex Copy
This is used to prohibit the use of the bypass tray when
making two-sided copies.
The bypass tray is often used to feed label sheets,
transparency film, and other special media for which
two-sided copying is prohibited. If a sheet of one of these
special media enters the reversing unit, a misfeed or
damage to the unit may result. If special media for which
two-sided copying is prohibited is often used, it is
recommended that you enable this setting.

Disabling of Auto Paper Selection
This setting is used to disable the Auto Paper Selection
function.
When this setting is enabled, automatic selection of
paper that is the same size as the original on the
document glass or in the automatic document feeder
does not take place.

Printer Settings

Prohibit Notice Page Printing
This setting is used to disable printing of notice pages.

Prohibit Test Page Printing
This setting is used to disable printing of test pages.
When this setting is enabled, "Printer Test Page" in the
system settings cannot be used to print test pages.

Exclude Bypass-Tray from Auto Paper Select
When [Auto] is selected for paper type selection, the
bypass tray can be excluded from the trays that can be
selected. This is recommended when special paper is
often placed in the bypass tray.

Image Send Settings

Other Disabling

Disable Switching of Display Order
This is used to prohibit changes to the order of display
(search number order, ascending, descending) in the
address book.
When this setting is enabled, touching a tab on the
address book screen does not change the order. The
currently selected display order will be the order that is
used after the setting is selected.

Disable Scan Function
This is used to disable USB memory scan.

Settings to Disable Registration

Disable Registering Destination from Operation
Panel
This disables address control from the machine.
Configure the setting for each of the following items:

• Group
• E-mail
• Internet Fax
• Fax

Select All: Select all items.
Clear Checked: Clear all selections.

This manual is related to the following products: