Print settings screen, Print settings, Screen – Sharp MX-M850 User Manual
Page 302
65
PRINT SETTINGS SCREEN
The print settings screen for printing a file on an FTP server or a file in USB memory connected to the machine is
explained below.
(1)
[Paper Select] key
This sets the paper size.
(2)
[Output] key
Use this to select output settings such as staple, punch,
and paper folding, and to select the output tray.
For the staple function and the punch function, see
"
STAPLING OUTPUT/PUNCHING HOLES IN OUTPUT
"
(page 32).
For the paper folding function, see "
SPECIFIED PAPER IN HALF BEFORE PRINTING
(Paper Fold Print)
" (page 54).
(3)
[2-Sided] key
Select this to print on both sides of the paper. The
orientation of the image on the reverse side of the paper
can be changed by selecting [2-Sided Booklet] or
[2-Sided Tablet].
For two-sided printing, see "
(page
(4)
[Quick File] key
This stores a job as a file in the machine's "Quick File
Folder" using the document filing function.
(5)
keys
Use these to set the number of prints.
(6)
[Tandem Print] checkbox
Use this to perform tandem printing.
For the tandem print function, see "
MACHINES TO PRINT A LARGE PRINT JOB (Tandem
Print)
(7)
[Fit To Page] checkbox
If you do not wish to use the Fit To Page function, make
sure this checkbox is not selected
. When printing a
file that includes print conditions (PCL or PS), this key
cannot be selected.
For the Fit To Page function, see "
" (page 29).
(8)
[Print] key
Touch this to begin printing.
1
Output
2-Sided
Quick File
Paper Select
Auto
Cancel
Tandem Print
Fit To Page
File-01.tiff
Number of Prints
(1 9999)
(1)
(2)
(3)
(4)
(5)
(8)
(6)
(7)