Sharp MX-M850 - Manual (Page 487)

167
CHECKING COMPLETED JOBS
You can check a list of the destinations, the destinations for which transmission failed, and other detailed information on
completed jobs that used document filing function, broadcast transmission jobs, inbound routing jobs and serial polling
jobs. Touch the key of the job for which you wish to display information in the completed jobs screen and touch the
[Detail] key. The job detail screen (see below) will appear.
The job name appears at the top of the job detail screen.
To view details on the job, touch one of the tabs. The following information appears on each tab.
Tab name Information displayed
File Shows information on a transmission/reception that used document filing function.
To call up the file and use it, touch the [Call] key.
Failed This shows information on destinations for which communication failed. A broadcast
control number (3-digits) appears in front of each destination.
Address: Address name or number
Start time: Time at which communication began
Status: Description of failure (error)
The [Retry] key can be touched to re-attempt transmission to that address.
All Destinations Shows all addresses specified in the job. A broadcast control number (3-digits)
appears in front of each destination.
Address: Address name or number
Start time: Time at which communication began
Status: Communication result
The [Retry] key can be touched to transmit to all addresses again.
When Scan to FTP or Scan to Desktop destinations are included in a broadcast transmission, the retry function cannot be
used.
Detail OK
Retry
Broadcast0001
EEE EEE NG000000
NG000000 FFF FFF
Start Time Address Status
10:01 04/04
10:10
002
010 04/04
1
1
Failed File All Destinations