Sharp MX-M850 - Manual (Page 135)

39
PAPER FOLDING FUNCTION
When the paper folding unit is installed, output can be folded to reduce the paper size by a half.
Paper sizes that can be folded using the paper folding function are 8-1/2" x 11"R, 8-1/2" x 14", 11" x 17", A4R, B4, and
A3. For detailed information on the sizes and types of paper that can be folded, see the specifications in the Safety
Guide.
The following screen appears when the paper folding key is touched.
Select the checkbox
of the paper size that you wish to use for paper folding and then touch the [OK] key. The paper
folding icon ( ) will appear in the base screen.
Original placement orientation
Place the original in the appropriate position as shown below so that folding takes place at the desired location.
Fold in Fold out
Output OK
OK Cancel Fold
Select the paper size to be folded.
A3
11x17 8 x14
B4 A4R
1 / 2 8 x11R 1 / 2
Loaded paper size
Paper size after
folding
8-1/2" x 11"R 5-1/2" x 8-1/2"
8-1/2" x 14 7" x 8-1/2"
11" x 17" 8-1/2" x 11"
A4R A5
B4 B5
A3 A4
• Special media such as transparency film and tab paper cannot be used.
• When 8-1/2" x 11"R, 8-1/2" x 14" or A4R paper is folded, it cannot also be stapled.
• When the paper folding function is selected, the saddle stitch or hole punch function cannot be used.
Document feeder tray Document glass Result
A B
AB
A B
A B
A B
A
B