Sharp MX-M850 - Manual (Page 582)

12
*1 When the Inserter is installed.
*2 This cannot be set on the machine. Set this in the system settings in the Web pages.
*3 When the network scanner expansion kit is installed.
*4 When the Internet fax expansion kit is installed.
*5 When the facsimile expansion kit is installed.
*6 When the application integration module is installed.
■ Device Control
X Image Send-Scanner* 3
41
‹ Customize 1 Address Review
‹ Customize 2 File
‹ Customize 3 Quick File
X Image Send-Internet Fax* 4
‹ (Same as Scan)
X Image Send-Fax* 5
‹ (Same as Scan)
X Image Send-USB Memory Scan
‹ Customize 1 –
‹ Customize 2 –
‹ Customize 3 –
X Image Send-Data Entry* 6
‹ (Same as Scan)
●
Home Screen Settings * 2 – 41
● MFP Display Pattern Setting Pattern 1 41
Item Factory default setting Page
■ Device Control
42
●
Other Settings 42
X Original Feeding Mode All Disabled 42
X Saddle Stitch Position Adjust * 1 0 mm 42
X Auto Paper Selection Setting Plain Paper 42
X Tandem Connection Setting
42
‹ IP Address of Slave Machine 0.0.0.0
‹ Port Number 50001
‹ Disabling of Master Machine Mode Disabled
‹ Disabling of Slave Machine Mode Disabled
X Detect Standard in Auto Color Mode * 2 3 43
X Double Feed Detection Setting * 3 All Enabled 43
X Status Indicator Setting Pattern 1 43
Item Factory default setting Page