Sharp MX-M850 - Manual (Page 486)

166
CHECKING A RESERVED JOB OR THE JOB IN
PROGRESS (FAX MODE)
The detailed contents of a broadcast transmission or serial polling job can be displayed. Select (touch) the key of the job
that you wish to check and touch the [Detail] key. The job details screen will appear (see below).
The job name and progress (number of completed destinations / total destinations) appear at the top of the screen.
To view details on the job, touch one of the tabs. The following information appears on each tab.
Tab name Information displayed
Fax Connecting Information on the current destination appears.
Fax No.: The fax number of the destination
Name: The name of the destination
Number: The broadcast control number (3-digits)
Pages: Number of pages completed / total number of pages
Fax Waiting This shows information on the destinations that are waiting. A broadcast control
number (3-digits) appears in front of each destination.
Address: The name of the other destination
Status: The status of communication
Failed This shows information on destinations for which communication failed. A broadcast
control number (3-digits) appears in front of each destination.
Address: The name or fax number of the destination
Start time: The time at which communication began
Status: The status of communication
All Destinations This shows all destinations specified in the job. A broadcast control number (3-digits)
appears in front of each destination.
Address: The name or fax number of the destination
Start time: The time at which communication began
Status: The status of communication
Name:
Number: 050 Pages: 005/010
AAA AAA
0123456789
Progress: Broadcast0001 050/100
Fax No. :
Fax Connecting Fax Waiting Failed All Destinations
Detail OK