Enable ethertalk, Enable netbeui, Reset the nic – Sharp MX-M850 User Manual

Page 620: Ping command

Text mode
Original mode

Enable EtherTalk

To use the machine on an EtherTalk network, this
setting must be enabled.

Enable NetBEUI

To use the machine on a NetBEUI network, this setting
must be enabled.

Reset the NIC

This returns all "Network Settings" to the factory default
settings.

Ping Command

Use this function to check if the machine can
communicate with a computer on the network.
Specify the IP address of the desired computer and
touch the [Execute] key. A message will appear
indicating whether or not the computer responded.

This manual is related to the following products:

MX-M950