Samsung SMO-211QN - Manual (Page 39)

Eng-39
3-5) TITLE MENU Function setting
• Function: Set the desired title of each camera.
• Setting method: Move to #5. TITLE MENU by using ▲/▼ KEY in the SETUP MENU, and press
the ENTER SWITCH to display the OSD as shown in the figure below. (The figure shows the
initial setting status.)
Move to a target camera channel by using ▲/▼ KEY then press the ENTER KEY to display a cursor at
the space of the first character in the camera title. Move the cursor to a target character in the OSD box
lower part by using ▲/▼ KEY, then press the ENTER KEY to set the character. The cursor
automatically moves to the next space after one character is set. Set the title of camera by repeating the
same method.
(Only eight characters are available for a camera title.)
TITLE SETTING
06/01/03 13:14:00
CAMERA1 CAM1
CAMERA2 CAM2
CAMERA3 CAM3
CAMERA4 CAM4
CAMERA5 CAM5
CAMERA6 CAM6
CAMERA7 CAM7
CAMERA8 CAM8
0 1 2 3 4 5 6 7 8 9 : = . ( )
A B C D E F G H I J K L M N O P Q
R S T U V W X Y Z [ / ] _ ~ ← + −