Cli: viewing and configuring system information – SMC Networks SMC TigerStack II SMC6624M User Manual
Page 90
5-22
Configuring IP Addressing, Interface Access, and System Information
System Information
C
onf
ig
uri
n
g
I
P
Ad
dre
ssi
ng,
In
te
rf
a
ce Acc
e
ss,
an
d
CLI: Viewing and Configuring System Information
System Information Commands Used in This Section
Listing the Current System Information.
This command lists the current
system information settings.
Syntax
:
show system-information
This example shows the switch’s default console configuration.
Figure 5-9. Example of CLI System Information Listing
Configure a System Name, Contact, and Location for the Switch.
To
help distinguish one switch from another, configure a plain-language identity
for the switch.
Syntax:
hostname
Note that no blank spaces are allowed in the variables for these commands.
For example, to name the switch “Blue” with “Ext-3002” as the system contact,
and “North-Data-Room” as the location:
SMC TigerSwitch 10/100(config)# hostname Blue
Blue(config)# snmp-server contact Ext-3002 location North-Data-Room
Blue(config)# show system-information
show system-information
below
hostname
below
snmp-server [contact] [location]
below
mac-age-time
time timezone
time daylight-time-rule
time (date and time)