SMC Networks SMC TigerStack II SMC6624M - Manual (Page 279)

10-1
M
oni
to
rin
g
and
An
al
yz
in
g
Sw
itc
h
Op
e
ra
tio
n
10
Monitoring and Analyzing Switch Operation
The SMC6624M switch has several built-in tools for monitoring, analyzing, and
troubleshooting switch and network operation:
■ Status: Includes options for displaying general switch information, man-
agement address data, port status, MAC addresses detected on each port,
and STP, IGMP, and VLAN data.
■ Counters: Display details of traffic volume on individual ports.
■ Event Log : Lists switch operating events.
■ Alert Log: Lists network occurrences detected by the switch (in the
Status | Overview screen of the web browser interface).
■ Configurable trap receivers: Uses SNMP to enable management sta-
tions on your network to receive SNMP traps from the switch.
■ Port or VLAN monitoring (mirroring): Copy all traffic from the spec-
ified ports or VLAN to a designated monitoring port.
N o t e Link test, ping test, browse configuration, and the Command prompt—analysis
tools in troubleshooting situations—are described in chapter 11, “Trouble-
shooting”. See “Diagnostic Tools” on page 13.