Siemens ProLINE-RoadRunner - Manual (Page 56)

5 4
ProLINE-RoadRunner Operator’s Guide A
Device Rotation
If devices rotate excessively on the
conveyor belt:
1. Press
Pause. Wait for all the
devices to get picked from the
belt.
2. Press the
Emergency Stop.
3. Remove the Dust Cover and
clean only the exposed surface
of the conveyor belt with
isopropyl alcohol on a lint-free
cloth, then dry it. Rotate the belt
by hand and repeat until clean.
4. To continue, replace the
Conveyor Dust Cover, release
the
Emergency Stop button
and press
Start. „
Dry 3
Rotate & Repeat 3
3 Clean