Siemens ProLINE-RoadRunner - Manual (Page 55)

5 3
ProLINE-RoadRunner Operator’s Guide A
If the tape jams, an error message
displays and the blue lamp
illuminates.
To clear the tape path:
1. Press the
Emergency Stop
button (to continue the job later)
or select
Job, then End, and
turn the power off.
2. Unroll one turn of cover tape
and cut it near the Take-Up Reel.
3. Pull the tape out backwards
until the cover tape end is free.
4. Cut the device tape.
5. Pull the tape out where it exits to
remove it from the machine.
6. Trim away any flaws before
reloading. „
Cut Pckt Tape
4
2
3
2 Cut Cvr
Clearing Jammed Tape