Speco Technologies DVR-T4IP - Manual (Page 68)

68
3.8.1 Backup Device
Set up the device for backup. HDD / USB/ CD-RW are available
In order to use HDD for backup, the function of HDD should be setup as “Manual Backup”
In the HDD Setting.
3.8.2 Start Time
Input the start of backup date and time.
3.8.3 End Time
Input the end of backup date and time.
3.8.4 Channel
Choose the channel to backup.
3.8.5 Event
Choose the event to backup. In case of none mode, selected files according to time will be
backed-up.
3.8.6 Backup Start
Based on the input date, time, channel and event & other condition search the images will be
backed-up to the chosen device. Back up progress rate is marked on the bottom right side of
the screen.
3.8.7 Format
This menu is used only when backup device is CD-RW. In case that backup device is CD-
RW, format command has to be done by this menu, before starting backup.
However, with CD-R media, backup can be started without format.