3 alarm output, 1 sensor, 2 motion – Speco Technologies DVR-T4IP User Manual
Page 41: 3 relay time, 4 post alarm record time, Alarm output, Sensor, Motion, Relay time, Post alarm record time
41
3.3.3 Alarm
Output
Figure 3-14 Alarm Output Setting:
3.3.3.1 Sensor
Configure the alarm out on/off activated by the sensor.
3.3.3.2 Motion
Configure the alarm out on/off triggered by the motion detection.
3.3.3.3 Relay
Time
Configure the alarm duration time. It can be set up from 1 second to 60 seconds in the unit of
5 seconds.
3.3.4
Post Alarm Record Time
Configure the recording continuation time after starting an event recording. It can be set up
from 10 seconds to 60 seconds in the unit of 10 seconds.