Speco Technologies DVR-T4IP - Manual (Page 112)

112
parameters of DVR.
5. System parameter->Default value setting: Initialize parameters values.
6. Communication->Network: Communicate data through network.
7. Communication->Serial: Communicate data through serial port (Setting preferable
ComPort)
8. Language: Click to select preferable language
9. Information: Click to display program version information.
4.6.3 Communication over Network or serial port
Click to open system parameter -> Write to DVR
The below window will be activated on
- After Setting system parameters
- Derive system parameters from DVR
=> Network mode as communication media
Enter assigned network access password for Admin. After authenticated, users can
communication between DVR using network.
=>Serial mode as communication media
Enter assigned network access password for Admin. After authenticated, users can
communication between DVR using serial port.