Speco Technologies DVR-T4IP - Manual (Page 17)

17
ZOOM: Zoom In/Out on the images during Live Viewing.
FRZ : Freeze.
- Press button once to freeze the frame at live mode. Press again to return.
- To take a still image capture at playback mode.
-Exchange of video input type : Press power button with FRZ button from NTSC to Pal or
PAL to NTSC.
MISC/SH: Miscellaneous functions or Shuttle Hold.
- MISC: To substitute for the five buttons that are placed on the remote control but on the
keypad (NET, OSD, Audio Mute, HDD, LOG).
- SH: Press button while using the Shuttle to hold the speed.SEARCH: Press once to open
the menu to search for recorded files.
PTZ: Pan/Tilt/Zoom. Press once to access the Pan/Tilt/Zoom/Focus control mode.
Press again to exit.
MENU: Press button to access Main Menu. Press again to return.
5. Direction/select button
UP: Used to move the cursor up; change possible values in the setup menu; under
PTZ control sub menu, used to move camera; or used to adjust focus.
DOWN: Used to move the cursor up; change possible values in the setup menu; under
PTZ control sub menu, used to move camera; or used to adjust focus.
LEFT: Used to change possible values in the setup menu. Under PTZ control menu,
used to move the camera left or used to do Zoom Out; At playback mode, used to
decrease playback speed.
RIGHT: Used to change possible values in the setup menu. Under PTZ control menu,
used to move the camera left or used to do Zoom In; At playback mode, used to
increase playback speed.
OK: Used as a selection key. Under PTZ control menu, used to be interchanged P/T
mode with Z/F mode
6. Jog/Shuttle
Shuttle: Multi-speed forward/reverse playback. Under Network Setup sub menu,
used to input parameters fast.
Jog: Frame by frame search.
7. IR receiver
Remote control signal receiver