Smeg SDO10 - Manual (Page 7)

Instructions for the user
9
6. ELECTRONIC PROGRAMMER (ONLY ON SOME MODELS)
The programmer user instructions are valid only for the large oven.
LIST OF FUNCTIONS
MINUTE-COUNTER KEY
COOKING TIME KEY
END-OF-COOKING KEY
DECREASE TIME KEY
INCREASE TIME KEY
6.1 Clock adjustment
When using the oven for the first time, or after a power failure, the display flashes regularly and
indicates . Press the keys and at the same time the keys o : each single press
changes the time by 1 minute either up or down.
Before setting the programmer activate the desired function and temperature.
6.2 Semiautomatic cooking
Use this setting for automatic oven switch-off at the end of cooking time. By pressing key , the
display lights up, showing ; keep the key pressed and at the same time, press keys o to
set the cooking time.
Release key to start the programmed cooking time count. The display will now show the right time
together with symbols A and .
6.3 Automatic cooking
Use this setting to automatically start and stop the oven.
By pressing key , the display lights up showing ; keep the key pressed and at the same time,
press keys or to set the cooking time.
By pressing key the sum of the right time + cooking time will appear; keep the key pressed and at
the same time, press keys o to regulate the end of cooking time.
Release key to start the programmed count and the display will show the right time together with
symbols A and .
After set-up, to see the cooking time remaining, press the key ; to see the end of cooking time
press the key .
Set-up with incoherent values is logically prevented (e.g. the contrast between a cooking time and a
longer period will not be accepted by the programmer).