Sanyo PLC-WL2503 - Manual (Page 53)

53
Setting Setting
Closed caption
Closed caption is a printed version of the program sound or
other information displayed on the screen. If the input signal
contains Closed captions, you can turn on the feature and
switch the channels. Press the Point ▲▼ buttons to select
Off, CC1, CC2, CC3 or CC4.
If the Closed caption is not clear, you can change the text
from Color to White.
Closed caption
 Note:
The Closed caption is available only under the situation
below.
• When the input signal is
NTSC of composite and
S-video, and the system is set according to the signal
or set on
Auto.
• The system must be set on NTSC or Auto in Video
System Selection. (p.39)
• The item of Closed caption is displayed in gray while it
is not available.
•
Closed caption is unavailable when On-Screen
Menu and P-timer are displayed.
Press the Point ▲▼ buttons to
select Off, CC1, CC2, CC3 or CC4,
and then Press Select button.