Sanyo PLC-WL2503 - Manual (Page 14)

14
Installation
Connecting to a Computer
Cables used for connection
• VGA cables (Mini D-sub 15 pin) *
• Audio cables
• HDMI-DVI cable
(*One cable is supplied; other cables are not supplied with the projector.)
 Note:
• Input sound to the COMPUTER/COMPONENT AUDIO IN
terminal when using the COMPUTER IN 1/COMPONENT IN
terminal as input.
• When the cable is of the longer variety, it is advisable to
use the COMPUTER IN 1/COMPONENT IN and not the
COMPUTER IN 2 /MONITOR OUT.
• Analog RGB and component signals can be output from the
COMPUTER IN 2/MONITOR OUT terminal when using the
COMPUTER IN 2/MONITOR OUT terminal as output.
Unplug the power cords of both the
projector and external equipment
from the AC outlet before connecting
cables.
External Audio Equipment
Audio cable
(stereo)
Monitor
Output Audio Output
AUDIO OUT
(stereo)
Audio Input
VGA
cable
COMPUTER IN 2 /
MONITOR OUT
COMPUTER IN 1 /
COMPONENT IN
Monitor Output
or
Monitor Input
VGA
cable
HDMI-DVI
cable
DVI
Output
HDMI
This terminal is
switchable. Set up
the terminal as
COMPUTER IN 2 or
MONITOR OUT.
(P. 50)
COMPUTER/
COMPONENT
AUDIO IN
Audio cable
(stereo)