Sanyo PLC-WL2503 - Manual (Page 46)

46
Keystone
Background
Select the background screen for when no input signal is
detected. Press the Point ▲▼ buttons to switch between
each option.
Blue . . . Project a blue background.
User . . . Project an image captured in the Logo setting.
Black . . Project a black background.
This function decides whether to display On-Screen
Displays.
On ........................... Show all the On-Screen displays. Use
this function when you want to project
images after the lamp becomes bright
enough. The factory default setting is
this option.
Countdown off ....... Show the input image instead of
the countdown when turning on the
projector. Use this function when you
want to project the image as early as
possible even when the lamp is not
bright enough.
Off ........................... Hide the On-Screen Displays except;
● On-Screen Menu
● Power off? (p.20)
● No signal for Power management.
(p.51)
● Please wait . . .
● Arrows for the True mode in the
Screen Menu (p.35)
● P-Timer
Display
Keystone
Setting
This function is used to adjust keystone distortion of the
projected image. Use the Point ▲▼ buttons to choose the
item you want to adjust.
Keystone
To correct keystone distortion, press the SELECT button.
Keystone appears on the screen. Use the Point ▲▼
buttons to correct keystone distortion (p.23).
Store or Reset
To store or reset the keystone correction, press the Point ►
button.
Store .....Keep the keystone correction even when the AC
power cord is unplugged.
Reset .....Release the keystone correction when the AC
power cord is unplugged.