Sharp FO-DC500 - Manual (Page 26)

Loading Printing Paper
24
3
Squeeze the paper guide and pull up to
move it to the appropriate holes for the
length of the paper. Push the guide
down into the holes.
4
Place a stack of paper in the cassette,
print side up.
•
Make sure the stack of paper is not
higher than the two tabs on the paper
guide and the two metal tabs. If it is,
remove some of the paper.
•
If you find it difficult to load the paper,
remove the cassette from the machine.
(Pull the cassette out as far as it will go,
grasp the left side of the cassette with
your left hand, and then lift it up and out
with both hands.)
5
Push the cassette back into the
machine, making sure it clicks into
place.
1
2