Sharp FO-DC500 - Manual (Page 180)

Print Hold
178
Turning on the Print Hold function
To turn on the Print Hold function, set Option Setting 38 to YES (see pages
189 and 199).
Note: A Print Hold code must be programmed before Option Setting 38 can
be set to YES.
Printing received faxes
When a fax has been received to memory because the Print Hold function is
turned on, RCVD PRINT HOLD FAX will appear in the display. Follow the
steps below to print the fax (or faxes).
1
Press and then .
•
Make sure that PRINT HOLD is
selected in the display.
2
Press .
•
Make sure that PRINT HOLD DATA
PRINT is selected in the display.
3
Press .
4
Press the numeric keys to enter the Print Hold code.
5
Press .
•
The received fax will print out.
MENU
START/
ENTER
START/
ENTER
START/
ENTER
Display:
MENU MODE
6:SERIAL POLLING MODE
7:MEMORY POLL MODE
8:NETWORK SETTING
9: PRINT HOLD
PRINT HOLD
1:PRINT HOLD DATA PRINT
2:PRINT HOLD CODE SET
3:PRINT HOLD CODE CLEAR