Siemens SED2 User Manual

Page 5

Rev. 1.0, September, 2002

NOTICE

The information contained within this document is subject to change without notice and should not be
construed as a commitment by Siemens Building Technologies, Inc. Siemens Building Technologies, Inc.
assumes no responsibility for any errors that may appear in this document.

All software described in this document is furnished under a license and may be used or copied only in
accordance with the terms of such license.

WARNING

This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in
accordance with the instructions manual, may cause interference to radio communications. It has been
tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable protection against such interference when operated in a
commercial environment. Operation of this equipment in a residential area may cause interference in which
case users at their own expense will be required to take whatever measures may be required to correct the
interference.

SERVICE STATEMENT

Control devices are combined to make a system. Each control device is mechanical in nature and all
mechanical components must be regularly serviced to optimize their operation. All Siemens Building
Technologies, Inc. branch offices and authorized distributors offer Technical Support Programs that will
ensure your continuous, trouble-free system performance.

For further information, contact your nearest Siemens Building Technologies, Inc. representative.

CREDITS

Product or company names mentioned herin may be the trademarks of their respective owners.

TO THE READER

Your feedback is important to us. If you have comments about this manual, please submit them to
[email protected].

Printed in U.S.A.