Aop setup & configuration, Setup menu, Backlighting – Siemens SED2 User Manual
Page 32
SED2 AOP Operating Instructions
24
Siemens Building Technologies
AOP Setup & Configuration
Setup Menu
Using the Setup option from the Main Menu of the AOP, you can personalize the following
characteristics of the AOP:
•
Backlighting
•
Screen Contrast
•
Large Numbers
•
Cursor Type
•
Start Help
•
Welcome Text
•
Parameter Set Names (Expert Level and above only)
•
User Defined Text
•
Set Time/Date (Service Level only)
•
AOP Reset
Use the following procedure to access the Setup menu:
1. From the main menu, use
and
to scroll through the list of options and to highlight the
Setup item.
Press
to confirm the selection. The AOP displays a setup menu.
2. Use and
to scroll through the setup menu and to highlight the desired option.
Press
to confirm the selection.
NOTE:
Simultaneously press
and
at any time to display relevant help screens.
Backlighting
To activate the backlighting option on the AOP, the following procedure should performed:
1. Use and
to highlight the Backlighting option on the setup menu.
Press
to confirm the selection.
The AOP displays a backlighting selection screen.
2. Use and
to select either an OFF or ON backlighting status.
Press
to confirm the selection.
NOTE:
When you select OFF for no backlighting, the AOP returns to the setup menu.
3. When
you
select
ON for backlighting, the AOP displays a backlighting timer screen. The
backlighting timer turns off the AOP backlighting after a specified time period of inactivity (in
seconds).
Use
and
to select either an OFF or ON timer function.
Press
to confirm the selection.
NOTE:
When you select OFF for the backlighting timer, the AOP returns to the setup
menu and the AOP backlighting functions continuously.