SIGMA SD14 - Manual (Page 85)

84
OVER-EXPOSURE WARNING
It is possible to indicate the over-exposed areas by highlighting them in red.
.
TO TURN ON OVER-EXPOSURE WARNING
1
Make sure the camera is turned on.
2
Press the button on the back of the
camera to display the Camera Set-up Menu.
(See P.104)
3
Use arrows on the 4-way controller to
select “Exposure Warning”.
4
Press arrow or to open sub-menu.
5
Use arrows on the 4-way controller to
select “On”.
6
Press arrow or to apply the setting or
arrow or to close the sub-menu without
making any changes.
TIP
•
The button can be used as a shortcut key to temporarily toggle the
over-exposure warning overlay on or off. Using the shortcut key will not
change the Exposure Warning setting in the Set-up Menu. (See P.98 to set
OK key shortcut.)