Reference, Optional accessories – SIGMA SD14 User Manual
Page 109

108
REFERENCE
OPTIONAL ACCESSORIES
REMOTE CONTROLLER RS-31
Wireless remote control, permits releasing the shutter from a place away from the
camera. Time for a shutter release can be set up in two stages. Moreover, a setup of
a channel is also possible, to avoid interference with other cameras and remote
controls. (For detailed information please refer page 67)
POWER GRIP PG-21
This battery pack extends power capacity of the SD14 two times and can also be
used as a vertical position grip. Two BP-21 Lithium-ion batteries can be used in
Power Pack SD. In addition, it is equipped with a vertical shutter release to hold the
camera steady in the vertical position.
ELECTRONIC FLASH EF-500 DG SUPER SA-STTL
Auto zoom flash with abundant light and STTL Automatic Exposure with the
maximum guide number 50/m (165/ft) (ISO100).
EF-500 DG SUPER SA allows you to use many advanced flash techniques such as
“STTL system Auto Flash” or Multi Flash etc. (Please refer to page 70 for details).
ELECTRONIC FLASH EF-500 DG ST SA-STTL
Auto zoom flash with abundant light and STTL Automatic Exposure with the
maximum guide number 50/m (165/ft) (ISO100). It provides a proper flash exposure
under any lighting conditions and it is equipped with bounce flash function, same as
EF-500 DG Super. (Please refer to page 70 for details.)
CABLE RELEASE SWITCH CR-21
It can connect with release socket, on the camera body, and the shutter can be
released, without touching the camera. This accessory minimizes the camera shake,
which can result in blurriness of your photograph, especially when using Mirror up
and a super-telephoto lens. (It is connected to release socket of the camera. Since
it is not equipped with “Halfway” operation. Please press the shutter button
“Half-way” and check the exposure. Please adjust the focus manually.)
AC ADAPTER SAC-2
This is used to provide a constant electricity supply when shooting in the studio, or
taking indoor shots. It is also recommended for use when connecting the camera
to your computer to transfer data.