SIGMA SD14 - Manual (Page 104)

103
CHANGING SLIDESHOW SETTINGS
You can customize slideshows by setting the length of time that images will be
displayed and specifying whether or not the slideshow will repeat itself
continuously.
SETTING OPTIONS DESCRIPTION
Duration
2 sec (default),
5 sec, 10 sec,
Manual
Set the length of time that each image in a
slideshow is displayed. (When set to “Manual”,
each image will remain on the screen until the
slideshow is manually advanced.)
Repeat Yes (default),
No Set whether the slideshow loops continuously or
stops on the last image.
TO CHANGE SLIDESHOW SETTINGS
1
Press to display the Modification Menu.
2
Use the arrows on the 4-way controller to
select the Slideshow Menu.
3
Use the arrows on the 4-way controller to
select “Settings…”.
4
Press to open the slideshow set-up page.
5
Use the arrows on the 4-way controller to
select a setting and use the
arrows to cycle through the setting options.
6
Once all changes have been made, press
to save the settings and return to the
Slideshow Menu.