SIGMA SD14 - Manual (Page 32)

31
FILE NUMBERING SYSTEM
The images you take are automatically assigned file numbers from 0001 to 9999.
When images are being reviewed, the file number of each image is displayed in
the left corner of the Info Strip (see
P.77 ). The file number is also incorporated
into the filename of the image. The filename consists of “SDIM” followed by the
4-digit file number and extension. For example: image number 0023 will be
stored in the file SDIM0023.X3F. All SD14 image files will be stored in the /
###SIGMA folder on the CF card.
File numbering can be continuous, or can be reset every time an empty card is
detected. Use the Camera Set-up Menu to set the file numbering system.
FILE NUMBERING OPTIONS
OPTION DESCRIPTION
Continuous
(Default) Numbering is continuous. The first file number assigned on an
empty card will be one higher than the last assigned number. (If
the inserted card contains SD14 images with file numbers
greater than the last assigned number, file numbering will
continue with one higher than the highest file number on the
card.)
Auto Reset Each time an empty CF card is inserted, or all images on the
current card are deleted, the file number will reset to its default
value of 0001. (If the inserted card already contains SD14
images, the file number will not be reset).
TO SET FILE NUMBERING SYSTEM
1
Make sure the camera is turned on.
2
Press the button on the back of the
camera to display the Camera Set-up Menu.
(See P.104)
3
Use arrows on the 4-way controller to
select “File Numbering”.
4
Press arrow or to open the sub-menu.