Setting the sensitivity ( iso equivalency – SIGMA SD14 User Manual
Page 58

57
TIP
•
When a custom white balance setting is successfully captured, "Custom"
will automatically become the selected item in the White Balance menu.
•
It is recommended that an automatic exposure mode such as P, A, or S
be used when capturing a custom white balance setting to ensure proper
exposure.
•
It may be necessary to set the lens to manual focus (P.50) when capturing a
custom white balance setting since auto focus may not work properly when
photographing low contrast subjects.
SETTING THE SENSITIVITY(ISO EQUIVALENCY)
The photosensitivity of digital cameras is described in terms of “ISO equivalent”
like silver-halide film cameras. (ISO sensitivity P.113)
1
Press the
button on the back of the
camera to open the Image Setting Menu.
2
Use the
on the 4-way controller to select
the desired ISO sensitivity value.
(The ISO value can be changed 100 → 200 →
400 → 800 by pressing – button. The ISO
value turns yellow, while selecting ISO
sensitivity.)
3
Press the shutter button halfway or
button
to apply the setting. Then you can take the
picture.
NOTE
•
If extended mode is selected you can use ISO up to 1600(See P.71)