Siemens 2000 - Manual (Page 6)

Menu Status
6
Logout
Navigation: Admin > Logout or User > Logout
If you click on Logout in the navigation area, you log out. The handset's
status screen (see Æ Handset) is displayed.
If you change from any Web Interface Web page to the Status menu,
logging out takes place automatically.
Menu Status
Handset
Navigation: Status > Handset
The properties and status of the handset are displayed:
Handset Name
The handset name is shown in the handset's idle display.
You can change the name (see Æ Handset Settings: Display). To do this,
open the Web page User > Handset Settings > Display.
Handset State
The following values are displayed:
– Idle
The handset is in idle status. You can access the Web Interface and
make settings.
– Active
You cannot access the Web Interface right now because a different
user is accessing the handset's Web Interface or because the handset
is not in idle status (e.g. a phone call is in progress or a menu is open
on the handset).
– Rebooting
The handset is being rebooted because, for example, you have reques-
ted a firmware update or a change to the network access profile. You
cannot access the Web Interface until the reboot has been completed,
i.e. when the status changes to Idle. When the status changes, the
Web page is automatically updated (reloaded).
MAC Address
The handset's device address. The MAC address is assigned by the manufac-
turer.
Firmware Version
Version of firmware that is currently loaded. Any firmware updates are
made available on the Internet. You can use the Web Interface to load
updates onto the handset. To do this, open the Web page Æ FTP Update
Firmware or Æ Local Firmware Update.
Hardware Version
Handset device version.