Siemens 2000 - Manual (Page 49)

Menu Status
49
Local Backup and Restore
Navigation: Admin > HTTP Transfer > Backup and Restore
When you have finished configuring the handset and entering all settings
you should save the handset configuration in a backup file on your PC or a
data medium (e.g. CD). In case of a system failure you can then restore the
settings from the backup configuration file to the handset.
Saving the current handset configuration to a file on the PC
Click on the Backup button in the Backup section. The current handset
configuration is written to the backup file. This opens a browser-specific
dialog for entering the folder and the name of the backup file. Click Save.
The current handset configuration is written to the backup file.
Restoring the handset configuration
You have saved the handset configuration to a backup file on the PC (see
above).
• Enter the name of the backup file on the PC (including the full path in-
formation) into the field Retrieve a saved configuration; otherwise,
click on the Browse... button and select the file.
• Click on the Restore button. The configuration saved in the backup
file is restored to the handset.
The handset is restarted automatically. The connection to the handset is
terminated.
You can also backup/restore the configuration via FTP, see Æ FTP
Backup and Restore.
• The current handset configuration is overwritten during the res-
tore process.
• During the backup process, the PINs are saved as well. During
restore, these PINs will be restored and activated.