Threshold settings, Saving/rejecting settings, Related topics – Siemens 2000 User Manual
Page 40
Menu Status
40
Threshold Settings
Maximum Jitter (in ms)
Enter a maximal value for jitter (from 1 to 255 ms) Default: 15 ms.
The jitter value is measured between two consecutive RTP packets. The
jitter value is checked against this threshold.
Average Round Trip Delay (in ms)
Enter a value for the average round trip delay (from 1 to 65535 ms).
Default: 100 ms.
Round Trip Delay is the total of the transmission duration in both directions.
Codec Type
Use this table to set the threshold values for non-compressing and
compressing packets, each for the next 1 to 255 packets.
– Lost packets per 1000 packets
These packets were lost during the transmission.
– Consecutive lost packets
This function counts how many packets were lost "in a row".
– Consecutive good packets
This function counts how many packets were transmitted "in a row".
Saving/rejecting settings
Click on the Apply button to store the changed settings on the handset.
Click on the Undo button if you want to reject the changes.
Related topics