Siemens 2000 - Manual (Page 17)

Menu Status
17
Menu Admin
Network
Profile Selection (Admin)
Navigation: Admin > Network > Profile Selection
You can store 16 network access profiles on your handset. In the profiles
you can specify the data for access to various access points (WLAN routers).
You therefore only need to activate another profile if, for example, you take
your handset from your home to your office.
A list is shown on the Web page containing all the network access profiles
stored in the handset.
The list contains the most important WLAN settings for the profiles (see
Æ
Meaning of WLAN settings messages displayed). You can identify the
profile that is currently active by the associated option activated in the
Active column.
You can change the profile, i.e. activate another profile, create a new
profile and edit or delete an existing profile.
Changing the network access profile – activating another
profile
In the list, click on the option associated with the profile in the Active
column and then on the Apply button.
The previously active profile is deactivated and your connection to the Web
Interface is terminated. The handset's status screen is displayed. The
handset reboots and registers with the access point using the access data
of the new profile. Once registration has been successfully completed you
can re-establish your connection with the Web Interface providing your PC
is still logged in within the same WLAN as the handset.
If the handset's IP address has changed, you must enter the new IP
address in the Web browser's address field to re-establish the
connection to the handset. You can display the new IP address on the
handset (see the user guide for the handset on the product CD).