Touch panel – Sony Cyber-shot 4-130-938-12(1) User Manual

Page 155

Table of

Operation

HOME/MENU

Index

155

Cannot print images.

• Check that the camera and the printer are properly connected using the USB Cable (DSC-T900) or

Cable for multi-use terminal (DSC-T90).

• Turn on the printer. For details, refer to the operating instructions supplied with the printer.
• If you select [Exit] during printing, images may not be printed. Disconnect the USB Cable (DSC-

T900) or the cable for multi-use terminal (DSC-T90) and connect it again. If you still cannot print
your images, disconnect the USB Cable (DSC-T900) or the cable for multi-use terminal (DSC-T90)
once more, turn the printer off and then turn it on, and connect the cable again.

• Movies cannot be printed.
• Images shot using other cameras, or images modified with a computer may not be printed.

Printing is canceled.

• The USB Cable (DSC-T900) or the cable for multi-use terminal (DSC-T90) has been disconnected

before the

(PictBridge Connecting) indicator was turned off.

Cannot insert the date or print images in the index mode.

• The printer does not provide these functions. Consult the printer manufacturer as to whether the

printer provides these functions or not.

• The date may not be inserted in the index mode depending on the printer. Consult the printer

manufacturer.

“---- -- --” is printed on the date-inserted part of the image.

• The image does not have the recording data so the date cannot be inserted. Set [Date] to [Off] and

print the image again (page 145).

Cannot select the print size.

• Consult the printer manufacturer as to whether the printer can provide the desired size.

Cannot print the image at the size selected.

• When you replace the printer paper with paper of a different size after connecting the printer to the

camera, disconnect the USB Cable (DSC-T900) or the cable for multi-use terminal (DSC-T90)
connected to the printer and then reconnect the printer.

• The print setting of the camera differs from that of the printer. Change the setting of either the camera

(page 145) or the printer.

Cannot operate the camera after canceling printing.

• Wait for a while as the printer is carrying out the cancellation. It may take some time depending on

the printer.

Cannot operate the touch panel buttons correctly or fully.

• Perform [Calibration] (page 62).
• [Housing] is set to [On] (page 63).

The paint pen operation reacts at inappropriate points.

• Perform [Calibration] (page 62).

Touch panel