Samsung Digimax350 SE - Manual (Page 80)

IMPORTANT NOTES
Caution!
Your new Samsung camera is a precision instrument. Whilst it is designed to withstand
general wear and tear, there are some important points that will help you get maximum
service and reliability from your camera.
The following should be avoided :
Severe changes in temperature and humidity.
Dust and dirt.
Direct sunlight or the inside of a vehicle in hot weather.
Environments where there is high magnetism or excessive vibration.
Areas with high explosives or highly flammable materials.
Pesticides, etc.
Sand can be particularly troublesome to cameras.
Sand or other small particulates can cause severe malfunctions.
Ensure that there is no contact with sand or similar particles.
Extremes in temperature may cause problems.
If the camera is transferred from a cold to a warm and humid environment, condensation
can form on the delicate electronic circuitry. If this occours, turn the camera off and wait
for at least 1 hour until all moisture is dispersed. Moisture build up can also occour in CF
CARD. If this happens, turn off the camera and remove the CF CARD.
Wait until the moisture has dispersed.