Samsung Digimax350 SE - Manual (Page 25)

READY
CAMERA WORKING MODE
Camera working mode
You can select the desired working mode by using the mode dial located on the top of the
camera.
This digital camera has 6 working modes. These are listed below
STILL IMAGE mode ( )
This mode is used for macro shots between 0.2m ~ 0.8m,
normal images from 0.8 ~ infinity and taking a moving subject
continuously.
NIGHT SCENE mode ( )
This mode is used at night or against a dark background.
In this mode you can select [LANDSCAPE] for scenery or
[PORTRAIT] for both scenery and portrait.
MOVIE CLIP mode ( )
This mode is used for movie clips.
The flash is changed to FLASH OFF when this mode is selected.
PLAY mode ( )
In this mode, the stored images on the CF CARD can be viewed on the LCD monitor on
the back of the camera or on an external monitor using a video output terminal.
If you view a shot which has additional sound recording, the sound will play back whilst
the image is viewed. You can select single image play back, 9 thumbnail screen, slide
show, image protection, all image deletion or CF CARD formatting in this mode.
PC mode ( )
Your computer will recognize the camera as a Removable Disk when connected by the
USB cable. You can transfer images between the computer and the camera.
SETUP mode ( )
In this mode, you can set up basic settings such as sound, format, auto power off, date /
time, LCD brightness.
Mode dial information