Samsung Digimax350 SE - Manual (Page 47)

ADV
ANCED
SETTING UP THE SHOOTING FUNCTION
EXPOSURE
This camera automatically adjusts the exposure according to the ambient lighting
conditions. However, you can select the exposure value by using [EXPOSURE] sub menu.
This function can be used in STILL IMAGE and MOVIE CLIP mode.
If you increase the exposure value, the image will be brighter.
If you decrease the exposure value, the image will be darker.
1. Turn the camera power on.
2. Rotate the mode dial to STILL IMAGE or MOVIE CLIP
mode.
3. Do not turn the LCD monitor off.
4. Press the MENU button to display the menu on the LCD
monitor. In STILL IMAGE mode, press the LEFT ( ) or
RIGHT ( ) button to select [STILL IMAGE 2/2] menu.
5. Press the DOWN button( ) and select [EXPOSURE].
6. Shift to the [EXPOSURE] sub menu by pressing the
RIGHT button ( ).
< STILL IMAGE mode >
STILL IMAGE 2/2
BACK : SET : OK
+0.0 EV
SHOOTING
EXPOSURE
ISO
W. BALANCE
< MOVIE CLIP mode >
MOVIE CLIP
BACK : SET : OK
+0.0 EV
EXPOSURE
ISO
W. BALANCE
EFFECT