Samsung Digimax350 SE - Manual (Page 61)

ADV
ANCED
SETTING UP PLAY BACK FUNCTIONS
6. Select the desired sub menu by pressing the UP ( ) / DOWN ( ) buttons.
- ONE IMAGE : This protects a single image.
- ALL IMAGES : This protects all the images on the CF CARD.
7. Press the OK button and the PROTECT setting display will show on the LCD monitor.
Select the desired sub menu by pressing the UP ( ) / DOWN ( ) buttons and press OK
button.
- LOCK : Sets up the PROTECT function.
- UNLOCK : Discards the protect function
8. If you select [ONE IMAGE] in step 6, the other image can be protected by pressing the
LEFT( ) / RIGHT( ) button. The process of setting up is same as step 7.
9. Pressing the MENU button clears the menu display and the LOCK indicator will show on
the LCD monitor as shown below.
PROTECT
MOVE IMAGE :
EXIT : MENU
SET : OK
UNLOCK
LOCK indicator
There is no indicator when the UNLOCK
function has been selected.
Reference
An image in LOCK mode will be protected from [DELETE] or [DELETE ALL] functions, but
will NOT be protected from the [FORMAT] function.